Using git svn, I just rebased feature branch onto master and fast forwarded master. How do I check that my master's history is linear?
I'm using git svn and I have two local branches: master and feature. My feature is done and now I want it to be part of the master branch. I think I'm supposed to do this:
git checkout feature
git rebase master
git checkout master
git merge feature --ff-only
Assuming that's right, I should be able to
git svn dcommit master back to the svn repo. But, is there a way to make sure my master is in the correct state before I attempt that? Specifically, I want to make sure my master's history is linear. How can I do that?
I tried running
git log --decorate --graph --oneline
But the output is massive and I'm not sure how to interpret it. I think it may contain all the history of my svn repo. All I want to see is the history of my local master to make sure it's linear.
Possible Duplicate: Change the current branch to master in git I have two branch in my git repo: master seotweaks (created originally from master) I created seotweaks with the intention of quick
I am using git version 184.108.40.206 and I have the following situation: Clone git repo from svn | * * (<= commits to master & corresponding commit to svn) * * | master (points to svn HEAD) | |___ m
I've just rebased a feature branch onto another feature branch (in preparation for rebasing everything to the head of my master), and it involved quite a few tricky merge resolutions. Is the rebase au
I have a repository in git. I made a branch, then did some changes both to the master and to the branch. Then, tens of commits later, I realized the branch is in much better state than the master, so
This is a complicated situation, but essentially what has happened here is that our branch has become separated from master. So essentially: A - B - C master \ X - Y - Z feature has turned into: A -
I've been making some vast changes on the master branch of my Git repository. I'm pretty new to Git and so I'm wondering: How can I move my current master branch to a new branch and recreate my master
With a mercurial repository, after initialising it, do I need to commit to the master branch first, before creating another named branch, or can I do: hg init hg branch develop and then commit onto t
After messing up with my git branches a lot, I ended up with a stable develop branch and unstable master. I merged my stable commit of develop branch into master. But still my master is unstable. How
I have the following recent history in my git repo. * 7661a06 (HEAD, origin/devConsolidate, devConsolidate) Fix seg fault; OCBA intermediary compares by value() now also | * 0bbe038 (origin/master, ma
I'm new to GIT and recently we moved our project from SVN to GIT. While moving the code-base we created GIT master repository from SVN TRUNK repo and left rest of code-base in SVN as it is. Meantime w
I have a local git repository with two remotes ('origin' is for internal development, and 'other' is for an external contractor to use). The master branch in my local repository tracks the master in '
I reset my local master to a commit by this command: git reset --hard e3f1e37 when I enter $ git status command, terminal says: # On branch master # Your branch is behind 'origin/master' by 7 commits
I forked popular project on GitHub that i want to contribute to. Now i made some changes to my master branch and pushed them to my master branch and made a pull request. However my pull request is now
Currently, after having rebased my feature branch onto the newest master commit, I have to use forced push to push the changes to the remote. Unfortunately, in this case it might happen, that I could
I am relatively new to Git and I want to know if this is correct to do and if there are other ways to remove a feature branch which is merged to master branch. Let me explain with a example: Let us as
OK, I thought this was a simple git scenario, what am I missing? I have a master branch and a feature branch. I do some work on master, some on feature, and then some more on master. I end up with som
I have a project tracked in git that has a master branch that becomes the release for my code. I have some code in that branch that is causing problems because an external library that it relies on is
I have several old branches that have been merged to the master branch. I want to start fresh, i.e, I want to delete all the previous branches except the master branch. The master branch will be the
We are using git for our codes control, and I have some question on it. I want this in a repo, using git it self or tools such as gitolite: only specified persion can merge code to specified branch
I have folder name utils I want to copy this folder from master branch to work branch. How do I do that ?
So, I have a maintenance branch and a master branch in my project. If I make a commit in the maintenance branch and want to merge it forward to the master branch, that's easy: git checkout master; git
I am trying setup a hadoop cluster in which i had already setup 1 master and 4 slave.Now I am trying to make redundant master and redundant slaves. How do i make 2 master (redundant master) and redund
I have forked a github project, then cloned it locally. I then made some changes in a new branch on my_github/the_project repo. I then added and committed the changes and pushed to my github repo and
I noticed the names master and origin being used a lot in git. What's the difference between these, and are either standard in git, or are they just common practice? Which would be the root folder
Possible Duplicate: How to merge a branch into another with override option in git I have some folders on a branch, I want them to just override the same folders on master. I dont want to go through
I'm trying to switch from a feature branch to master without losing my changes, and so I'm trying to git stash and then switch to master, but master is moving to my feature branch. Basically: <feat
I want to check out from a mirror, but commit to the master without svn sw , is it possible? With svn sw --relocate I can do this, but I want to automatically change from slave to master during commi
I am trying to checkout a specific revsion of my svn codebase. Normally, to checkout, I just type git svn clone svn+ssh://path_to_codebase. I need to checkout an older version of the codebase. How do
How do I create a branch in SVN?
Say I created a feature-x branch and merged or rebased with master branch. Now in future is it possible to remove all the changes I added through feature-x branch through git? This is is a common fea
I've just started using gerrit and i want to know why we need to do git push gerrit HEAD:refs/for/master instead of doing git push origin master If i do git push origin master i get the error saying !
I would like to force other team-members to not work on the master-branch but on a development branch. we have a central git-repository where we push our work into. i would like to know if it's possib
Whenever I'm rebasing in my feature branch from our 'master' branch, my feature branch seems to lose its tracking information. What's wrong with this workflow? $ git clone repo_url $ git co -b feature
My colleague and I have recently implemented git, and have just tried to implement rebasing. So, we have a remote master branch, cloned locally, and I have a local (and remote) branch called changes.
I'm trying to find the syntax for merging a tagged commit onto another branch. I'm guessing that it's straight forward but my feeble search attempts aren't finding it.
How do I set a Git remote's HEAD reference to point to something besides master? My project has a policy not to use a master branch (all branches are to have meaningful names). Furthermore, the ca
My remote repo's master branch looks like this (each one is a commit): A - B - C - D - E - F - G I would like to get a code review that diffs C and G (C's changes from B should not be displayed). How
It's possible that I'm not really understanding how git works here, but I have a master git branch, and then I created a new branch called refresh. I switched to the refresh branch, made a ton o
I just need to delete a master branch and is proving to be hard. I just want to clean that branch out and start new. I am deteting from dev branch. I want master on git hub to be clean. # git push or
say that i've been working in master, and i've just realized that maybe my last few commits (say, 15 of them) probably belong on a branch. how do i create a branch, containing all of the commits from
In another question it was recommend that I try resetting a remote tracking branch to an earlier commit and performing an import a second time. I can't figure out how to do that! I can reset master, b
I've got a git repository with two branches, master and amazing_new_feature. The latter branch contains the work on, well, an amazing new feature. A colleague and me are both working on the same repos
The master branch of a new project's git repo contains only prototype/spike code. I'm about to re-start the coding from scratch, now that I have the basic ideas understood. I want the master branch to
Using the git flow model, I've got a feature branch that was split from the develop branch at some point in the past. While I'm working on my feature branch, other developers commit to the develop bra
git checkout master git archive stage | tar -czf archive.tar.gz htdocs # archives master because it's checked out. How can I archives the stage branch, regardless of the current I'm on?
I'm using a CalendarItemType view to retrieve calendar items. The only items I care about are those that I've created and I know that they are all weekly recurring items. I'm able to get each individu
I am trying to keep a feature branch up to date by merging trunk into the branch. Problem is, that about 2000 files that was there when the branch was created, and that has been left untouched on both
I do not want to rename a remote branch, as described in Rename master branch for both local and remote Git repositories. Instead, I want to use simplest way to rename local branch, which is not pushe
Possible Duplicate: Show just the current branch in Git I am moving my monotone DVCS to git. In my build setup I have qmake get the current revision and the current branch (because these are build o
Imagine the following state of a repository: feature *-----* / master *---*---*---* I clone and then checkout master onto my machine. I then merge the feature branch and there are conflicts. Performi