Does git checkout pull changes from origin?
I am writing a deployment script, this is what it does:
# Fetches all branches and tags
git fetch origin
# Checkout the branch/tag
git checkout 2.1.0
If 2.1.0 is a tag
I guess I have the latest version available since a tag can't change, so everything is good.
If 2.1.0 is a branch
If this is the first time I checkout the branch, I guess everything is good (I'll be getting the most up to date version of the code).
If the branch has already been checked out, does the
git checkout command checks out the remote branch, or the local branch? -> do I need to pull to get the latest version of the code?
Is it possible to pull specific files or changes from another users working directory using thier Local IP address? e.g. git pull http://192.168.1.101/sandbox/somefile.php It should be noted that bo
I'm not finding my answer in the online git lit. It is clear that git checkout is destructive in that it will throw away local modifications but does it also destroy commits by changing the structure
On Github, I wanted to make a change to a pull request. 1. git fetch origin 2. git checkout -b show-buttons origin/my-branch Then I made some changes to files. Now I want to add these files back to
Is it possible to prompt for a password when running: git push -u origin master but not when running: git pull origin master ? I would like my developers to be able to keep the dev sites up to date wi
Using git 2.1.1 over NFS with a bare master repository. Users are occasionally seeing an otherwise successful 'git pull --ff-only' into a repository with no outstanding or un-pushed changes of any ki
I've cloned a repository called A and created a new branch called Li. Now someone updated A's master branch and I've pulled the changes to my master branch using: git checkout master git pull origin m
I am trying to pull changes from remote branch but getting an error which doesn't make sense when I do git pull I get back error: Your local changes to the following files would be overwritten by me
I need to fetch everything from a few different, distinct repositories (all remote branches and all changes to those branches). I tried git pull --all but for some reason, I get the following message:
Is there any way to set up git such that it listens for updates from a remote repo and will pull whenever something changes? The use case is I want to deploy a web app using git (so I get version cont
I commit a few changes locally and then push to github using 'git push origin master'. It always pushes the complete code base (judging by the amount of data transferred). I must be missing something
My problem is related to Fatal Git error when switching branch. I try to fetch a remote branch with the command git checkout -b local-name origin/remote-name but I get this error message: fatal: git
I'm trying to pull from a repository which has about 10 files. On my local repository, I only have one file. When I type git pull origin master I get back Everything up to date However, I'm still m
Following instructions given [here:] to create a Git repository. All went well until the last line: $ git push -u origin master fatal: 'origin' does not appear to be a git repository fatal: The
My colleague has a repository and doing: $ git remote show origin outputs: * remote origin ... Remote branches: ... DowSzkDoZgl tracked IR-Prod tracked ... Local branches configured for 'git pull': Do
From a git branch, a colleague of mine ran git diff origin master What is it supposed supposed to do? What does origin separately point to? This is related, but not covered in In Git, what is the d
I've just started using Git (previously Subversion). I'm having real problems getting my head round being unable to see pushed or pulled changes in the original repository. My 'architecture' is this:
I have a problem with running git pull from a php script on a remote server. I have looked at a lot of different sources to make it work but none works for me. So what have I done so far: Created the
So I'm on a branch, let's call it feature/PRO-10 and I want to switch to another branch to quickly check the state of a piece of code. I do a git stash to stash my changes and then a git checkout bugf
When I run git pull origin test, I get fatal: unable to connect to cache daemon: Permission denied followed by the prompt for the github username and password. The directory is located under my homef
I did some interesting work in a topic branch. Now I want to clean those changes before committing into the main branch. So I'd like to pull all those changes into the working tree: have the working t
I need to do several two-step or three-step commands in Git quite frequently, that require me to also specify a branch name as a parameter - things like: git checkout (branch name) git pull origin
Is there a command to check what remote git push and git pull will use? All the documentation I have found states that git push will push to the origin if a remote is not specified, however nothing i
I just tried to do a force push to a remote branch like this: $> git checkout myBranch $> git rebase origin/master $> git push --force origin/myBranch fatal: 'origin/myBranch' does not appear
I was working on a local branch and I needed to pull down one of the branches from origin so I issued the following command: git pull origin design When I did that, that branch ended up being merged i
After pulling changes committed and pushed by other developers by git pull, do I need to run git checkout or something else to get my local working copy fully synchronized with the latest version of
When I attempt to git pull origin [branch] in order to pull in changes to the repo, I am prompted for a password. My system password and just hitting enter return: fatal: Authentication failed. The
My origin has a fixes and a fixes_v3 branch. My client has just fixes. I do a git pull git+ssh:/.../mygitrepo and suddenly on my client I have all the fixes_v3 code in the fixes branch. Why on earth d
I have a problem with a git repository. I will describe what I did. I have created a repository in side an existing folder with files using the command git init I added a remote with git add origin g
I would like to clone a project from a Git server and then perform some tests and then deploy to Heroku. I have been able to get my project from Git, and then perform bundle install which does succe
I was taught that you could push to and pull from a remote branch matching the name of your current Git branch by doing: git push origin HEAD or git pull origin HEAD Its always worked for me before,
I messed up on my rails app so I used the command: $ git checkout -f to go back to my previous commit and get rid of my screw ups. After research I see that this command undos all local changes! Now
I am trying to merge different versions of the same file in git for one of my projects. The only way git will let me do this is by branching the repo, modifying the file, and then pulling the branch i
I tried many times doing a git pull and it says the branch is not specified. So the answer in How do you get git to always pull from a specific branch? seems to work. But I wonder, why doesn't Git d
I wanted to revert all local changes with git checkout -- . but accidently did git checkout - . and it made lots of local modifications that I can't understand at all. What does the second command d
I have managed to connect xcode git and tfs 2013.But Me and my team mate facing problem while push and pull changes from repository.I am facing following issues while push/pull our changes. When I try
My personal repository has some repositories as submodules. And the following command $ git submodule foreach git pull origin master was faced with the following result right after entering ruby repo
The scenario: I make some changes in a single file locally and run git add, git commit and git push The file is pushed to the remote origin master repository I have another local repository that is d
I have a branch called experiment. git checkout master echo 'some changes' > a.txt # now master branch has local changes which are not committed git checkout experiment Sometimes I have noticed t
$ git branch -a * master remotes/origin/HEAD -> origin/master remotes/origin/lab_master remotes/origin/master $ git checkout lab_master error: Your local changes to the following files would be ove
I pushed a change to a remote test git repo, then reset my local git repo to HEAD^, and now am trying to push my local repo to origin, but I get a non fast forward merger warning. If I do a git pull
I would like to know if git pull will update all my branches or just the master branch? Or Does it just pull the current branch I am working in?
When trying to do a git pull I get You have unstaged changes.. When I do a git status it says: nothing to commit (working directory clean). Why? I can do a git reset --hard, then pull, but I don't u
If I want to replace a folder on a working branch with the same folder from another branch, I can call: git checkout OTHER_BRANCH -- /path/to/folder what is the meaning of the -- ?
I have a very big and old project - with hundreds commits every week. how to checkout it from chosen revision and make git index it only from that revision?
I can't seem to find a good explanation of this. I know what git pull does: 1) a fetch, i.e. all the extra commits from the server are copied into the local repo and the origin/master branch pointer m
I'd like to keep Git repositories on four machines synchronized, and all of them are private repos. Is it possible to set up a single Git repository to pull from the other three machines at the same t
Say I have a feature branch, into which I merge upstream changes prior to pushing my changes back: git branch feature1 ... [edit my code] ... [commit] git fetch origin master git merge fetch_head [or
I'm coming from a perforce background, trying to understand gitHub. In Perforce when I checkout something it lets other users know I am working on that file. Does checkout work the same way in Git?
I've seen this on a question about a git cronjob where git -q pull origin master was being used. But I simply can't find anything on what the -qparameter does? What difference is there in using, for e
I had hoped this would work: git checkout remote/tag_name but it doesn't. This does: git checkout tags/tag_name but I'm doing something weird where I have a lot of remotes, and I'm worried about wha